KRAUS KCH-1000 Loften All in-One 33 in. Drop In/Undermount Single Bowl 18 Gauge Stainless Steel Kitchen Sink with Pull Down Faucet
Designed with a right off-set drain， straight walls， and tight-radius corners， the Loften high-capacity stainless steel sink will add a contemporary feel to your kitchen. Convenient dual mount configuration allows you to install it as an undermount or top mount with any type of kitchen counter. Handcrafted from high quality T304 stainless steel with gently sloped bottom and creased channel grooves that allow for superior drainage. Comes paired with a commercial style pull-down faucet with 20 in. reach for a cohesive look and optimum efficiency
- BEST VALUE SET INCLUDES: sink， faucet， bottom grid (dishwasher-safe)， drain assembly， removable drain cap， water supply lines， mounting hardware， and 2 cutout templates
- ENGINEERED FOR EASY DRAINING with right offset drain， sloped sink bottom and channel grooves to keep sink free of standing water
- EXTRA DEEP BOWL provides more room for stacking dishes， and washing large items like stockpots and baking sheets
- EXTRA-THICK DECK (3mm) with a beveled edge sits flush against the counter and makes it easy to wipe water and crumbs straight into the sink
- DURABLE & DENT-RESISTANT sink made with highest quality 18-Gauge T-304 stainless steel
- FULLY INSULATED WITH NOISEDEFEND: Extra-thick pads cover all sides of the sink to reduce unwanted noise and vibration
- TIGHT-RADIUS CORNERS are designed for easy cleaning
- DUAL MOUNT DESIGN allows for undermount or drop-in installation with any kitchen counter
- LONG-LASTING FINISH will not dull from daily use
- 2 PRE-DRILLED HOLES for faucet and soap dispenser installation. Includes optional stainless steel plug for when second hole is not in use
- DECORATIVE DRAIN COVER (CapPro) is included to conceal drain assembly and garbage disposal for a seamless look
- 18 in. HEIGHT COMMERCIAL-STYLE FAUCET optimized to fit underneath almost any kitchen cabinet. Crafted from solid brass.
- CERTS: NSF/ANSI 372-2016， EPA’s WaterSense High Efficiency Lavatory Faucet Specification， Cal Green， ASME A112.18.1-2012/CSA B125.1-12， NSF/ANSI 61-2015 ASME A112.19.3-2008/CSA B45.4-08 (R2013)
Dimensions
| Actual Left to Right Length (In.) | 33 | Bowl Below Counter Depth (in.) | 9 |
|---|---|---|---|
| Bowl Front to Back Width (in.) | 17 | Bowl Left to Right Length (in.) | 30.5 |
| Bowl Top to Bottom Depth (in.) | 9.5 | Cut-Out Below Counter Depth (in.) | 9.5 |
| Cut-Out Depth (in.) | 22 in | Cut-Out Width (in.) | 33 in |
| Kitchen Sink Front to Back Width (In.) | 22 | Spout Height (in.) | 6.375 |
Details
| Bundle Type | Sink w/ Faucet | Color Family | Silver |
|---|---|---|---|
| Color/Finish | Stainless Steel | Drain Location | Rear |
| Faucet Finish | Stainless Steel | Faucet Flow Rate (gallons per minute) | 1.8 |
| Faucet Type | Pull Down | Features | Corrosion Resistant， Heat Resistant， Insulated， Sound Dampening， Tight/Zero Radius |
| Included | Bottom Grids， Drain， Drain Cap， Faucet， Mounting Hardware | Kitchen Product Type | Kitchen Sink |
| Minimum Cabinet Size (in.) | 36 | Mount Type | Drop-In/Undermount |
| Number of Bowls | Single Bowl | Number of Faucet Holes | 2 |
| Product Weight (lb.) | 28.82 lb | Remote Access | No Remote Access |
| Sink Finish Type | Satin | ||
| Sink Gauge | 18 Gauge | Sink Material | Stainless Steel |
| Sink Shape | Rectangular | Spout Reach (in.) | 8.688 in |
Warranty / Certifications
| Certifications and Listings | EPA Approved， IAPMO Certified | Manufacturer Warranty | Lifetime Limited Warranty |
|---|
Manuals and Support
- Specification
- Warranty
- Installation Guide
- Use and Care Manual
- Sink: 33 in. x 22 in. x 9 in. minimum cabinet size 36 in.
- 18 in. height Bolden kitchen faucet with 20 in. pull down hose.
- Includes faucet， grid， strainer， drain cap， mounting hardware.
Comment